0 in Stock
Specifications:
| Price | $23.93 |
12 in Stock
Smith’s Gourmet Slide-Sharp 2-stage knife sharpener is made with both carbide blades, perfect for bringing your dull and damaged knives back to life, and ceramic blades for those quick touch-ups and polishing of already sharpened knives. The Slide-Sharp has a non-slip base giving you added stability while sharpening your straight edge knives and Smith’s patented Edge Grip technology allows for sharpening on a table or countertop edge to prevent your larger knives from dragging over the surface. MORE»
| Price | $7.63 |
0 in Stock
Smith’s Gourmet Slide-Sharp 2-stage knife sharpener is made with both carbide blades, perfect for bringing your dull and damaged knives back to life, and ceramic blades for those quick touch-ups and polishing of already sharpened knives. The Slide-Sharp has a non-slip base giving you added stability while sharpening your straight edge knives and Smith’s patented Edge Grip technology allows for sharpening on a table or countertop edge to prevent your larger knives from dragging over the surface. MORE»
| Price | $7.63 |
1 in Stock
The Cordless Knife & Tool Sharpener uses adjustable angle guides at 15°, 20°, 25° and 30° to sharpen all your knives and tools with 1 unit. Floating backing plates allow belt to stay straight and not burn the blade tip. A ceramic deburr slot puts the finishing touches on the edge. The unit comes with rechargeable lithium ion batteries that provide a continuous runtime of 15 minutes. Quick charge technology delivers full battery charge in under an hour. The Smith's 50902 Battery Powered Knife Sharpener includes 3 abrasive belts (fine, medium, and course).
Specifications:
| Price | $60.77 |
25 in Stock
Smith's is proud to offer the ultimate in sharpening steel technology with the "World's First" interrupted surface, diamond coated, oval sharpening steel. Smith's 10" Diamond Sharpening Steel features a unique sharpening surface with a overlapping oval hole design, which is coated with multiple layers of micron-sized monocrystalline diamonds. This innovation helps speed the sharpening process by collecting and holding the metal filings which ordinarily build up during the sharpening process. It comes with a soft grip rubber handle and oversized hand guard for comfort and safety. Unlike conventional steels, which only realign your cutting edge, the Smith's 10" Diamond Sharpening Steel hones and realigns your edge at the same time.
Manual Features:
Grit: Fine: Diamond 750 Grit
Product Instructions
Consistency of the sharpening angle to the cutting surface of the Diamond Sharpening Steel is essential in order to achieve the sharpest edge possible. We recommend that you use an approximate 23 degree sharpening angle for best results.
Caution: If the Diamond Sharpening Steel touches any part of your knife other than the cutting edge, scratching could occur.
Sharpening Instructions:
Care: Always clean your sharpener after use. We recommend that you use soapy water with a mild nonabrasive brush, never use a steel brush. After cleaning always dry off your sharpener before storing.
MORE»| Price | $30.35 |
0 in Stock
Smith's, the leader in innovative sharpening technology, is proud to offer an electric knife sharpener that incorporates both manual and mechanical sharpening elements. This unique combination provides a broad capability to easily sharpen dull blades and maintain razor sharp edges.
The sharpening wheels on your Edge Pro Compact Electric Knife Sharpener are made from bonded synthetics. The synthetics used are selected for their ability to guarantee longer wheel life, uniform cutting, and minimum heat build up, so that de-tempering of your blade does not occur. our wheels are manufactured according to strict tolerances in order to ensure the same high quality on each and every wheel that we make.
The crossed ceramic rods put the final finished edge on your blade. Crossed ceramic rods create a fixed sharpening angle that lightly hones both sides of your blade at the same time; thus, putting a polished, razor-sharp cutting edge on your knife. Also, the crossed ceramic rods are excellent for giving already sharp knives a a quick touch-up before use. Just a few, quick pulls through the sharpening slot is all it takes. Smith's recommends always using the ceramic rods for final edge honing after you sharpen using the synthetic wheels. Again, just a few pulls through the sharpening slot is all it takes.
Product Features
Features:
Product Instructions
Electric Sharpening Instructions:
Caution: Always sharpen your knife blade from the heel to the tip of the blade. Never insert the tip of the knife blade into the blade guide first or push your knife blade through the sharpening slot. This could damage the knife sharpener and/or your knife. Due to some handle designs, you may not be able to sharpen the entire length of the blade using the electric sharpening wheel. We recommend using the manual sharpening slots in these limited cases.
Clean all food or dirt off your blade. Never sharpen a dirty knife blade as this could cause the sharpener to malfunction or damage the sharpening wheel.
Insert the plug on the end of the power cord into a standard 120 volt electrical outlet. Connect the other end of the power cord into the end of the sharpener.
Place the unit on a flat, sturdy surface and turn the unit ON by pressing the vertical ON/OFF switch. you will notice two sharpening slots for electric sharpening, one for each side of your blade. In order to get the best results and to reduce excessive wheel wear, it is important that you do the same number of strokes on each side of your blade. Select the sharpening slot you would like to use first.
Hold the knife securely by the handle as you would in normal usage and position the heel of the blade over the selected sharpening slot. While holding the blade parallel to the table, lower the heel of the blade until it contacts the synthetic sharpening wheel. As soon as contact is made and you hear the distinctive grinding sound, pull the blade at a consistent speed though the sharpening slot using light, downward pressure. To sharpen the tip of the blade, lift up on the knife handle slightly as the curved portion of the blade is drawn through the blade guides.
Continue alternating passes between the two slots at the recommended speed.
Manual Sharpening Instructions:
Use the manual finishing slot to complete the sharpening process by removing any burrs left on your blade from the sharpening wheel and hone both side of your blade.
Hold the blade parallel to the table and center the heel of the blade in the bottom of the crossed ceramic rods.
Starting at the heel of the blade, pull the blade through the crossed ceramic rods while applying light, downward pressure (never back and forth). Remember to lift at the end of the stroke to sharpen the tip of your blade.
Repeat this process until your blade is razor sharp. Usually 3 or 4 strokes is all it takes.
Care:
| Price | $25.95 |
8 in Stock
Whether you are sharpening a very dull or damaged blade or you are just touching up an already sharp blade at home or in the field, the Edge Stick sharpener delivers unmatched sharpening performance. It's high quality abrasives, cast aluminum housing, reversible components, and fabric storage pouch make it the only sharpening tool you will carry that produces a sharp, longer lasting edge every time on your knife, broad head, or tool.
The Edge Stick Sharpener is part of the Edgesport™ PRO SERIES line of sharpeners. The Pro Series line was created for those sports enthusiast who demand the highest quality sharpening tools and abrasive sharpening components. These products are engineered to deliver a level of sharpening performance unmatched by standard edge car products.
Product Features
Stone Grit: Fine Diamond = 750
Stone Size: .375" x 2.875"
Product Instructions
Carbide Blades:
Diamond Stones can be used with a sharpening lubricant (water or honing solution) or dry. Smith's recommends their non-petroleum based Honing Solution for best results. DO NOT use petroleum based oil as a sharpening lubricant with this stone.
Place your blade on the end of the stone at the desired sharpening angle and push the blade away from you like you are trying to carve a thin layer off the top of the stone. Use moderate to light pressure when pushing; let the diamonds to the work. Repeat this pushing stroke 3 or 4 times. NOTE: Try to keep the same angle with each stroke. This is the key to obtaining the sharpest edge.
Now sharpen the other side of the blade by placing your blade on the opposite end of the diamond stone and pulling the blade toward you. Again try carving a thin layer off the top of the stone. Repeat this pulling stroke 3 or 4 times.
Continue steps 1 and 2 until you feel your blade is truly sharp. Remember, maintaining a consistent angle and doing the same number of strokes on each side of the blade is the key to obtaining the sharpest edge.
Break-In Period: The initial aggressive cutting speed of all Diamond Sharpening Stones will slow with use. At the same time, the abrasive finish will improve. Do not be confused by this break-in process. It is normal and should be expected. your diamond stone is breaking in, NOT wearing out.
Care & Storage: Always clean your sharpener after use. Clean with a damp cloth or mild brush and wipe dry. Store in fabric pouch.
| Price | $21.08 |
10 in Stock
Designed for the Sports Enthusiast who demands the highest quality sharpening tools and abrasives, the Edge Pro Pull-Thru Knife sharpener delivers a level of sharpening performance unmatched by standard edge care products. This sharpener offers two stages of sharpening for all types of knives, everything from everyday pocket knives to the finest customer sport knives. The precision ground carbides remove metal in a smoother, more consistent fashion when setting the edge on very dull straight edge blades, and the specially shaped ceramic stones can be used to lightly hone either STRAIGHT or SERRATED edge blades. It has an ergonomically designed soft grip handle and non-slip rubber feet for comfort and safety.
Product Features
Features:
Product Instructions
Caution: Always rest your sharpener on a sturdy, flat surface and use the handle of the sharpener for stability and control during sharpening.
Place the Edge-Pro Pull-Thru Knife Sharpener on a flat, sturdy surface. Hold the handle of the sharpener with one hand and the knife with the other hand.
Select the appropriate sharpening slot to use. COARSE = quick, aggressive removal of metal. Use for quick edge setting of very dull or damaged blades. Usually, 4 to 5 strokes is all it takes, but knives made of very hard steel may take additional strokes. FINE = removes very little metal. Use for final edge honing and polishing or to touch up an already sharp blade. Usually, 8 to 10 strokes is all it takes, but knives made of very hard steel may take additional strokes. Note: A reasonably sharp blade may only require light honing in the Extra Fine sharpening slot. The Fine sharpening slot is intended for dull blades that require more maintenance.
Insert knife blade into the preferred sharpening slot at a 90-degree angle to the sharpener. Tilt the tip of the knife blade down just slightly.
Press down with light to moderate pressure and pull the knife blade through the sharpening slot from the heel to tip (never back and forth).
Repeat this action until blade is sharp. If you started the sharpening process in the COARSE slot, move to the FINE slot for final edge honing. Always finish the sharpening process in the FINE slot.
Reversible & Replaceable Carbide Blades and Ceramic Stones - When the carbide blades and/or ceramic stones stop removing metal from the knife blade, they can be rotated for use on the other side or replaced. To rotate or replace, remove the two screws and the plastic cover. Remove the stones and rotate 180 degrees. Reverse positions by placing the front ceramic stone into the back slot, and the back ceramic stone into the front slot. Replace the cover and screws. If replacing, add new blades or stones then replace the cover and screws.
Care & Storage: Always clean your sharpener after use. Clean with a damp cloth or mild brush. Do not rinse with water. Store in a drawer or cabinet.
| Price | $15.12 |
0 in Stock
Simple and dependable, the JIFFY-Pro Handheld Sharpener is quick, safe, and easy to use in the field, back at camp, or in your home. The knife sharpening slots incorporate crossed carbide blades used to set the edge on your extremely dull or damaged blade and crossed ceramic rods used for honing the final edge to razor sharpness. These fixed abrasive components create a preset sharpening angle that guarantees results every time no matter where you are sharpening your knife. The scissors sharpening slot in the handle of the JIFFY-Pro has been enlarged to accommodate game shears as well. It uses a patented, "FLOATING" carbide rod that adjusts to fit the precise bevel of the blades and has a soft grip rubber handle for a firm, comfortable grip in all conditions.
Product Features:
Product Instructions
Knife Sharpening Instructions
NOTE: These instructions only apply to straight edge knives with a flat grind on both sides of the blade. This sharpener is not intended for use in sharpening serrated edge blades or blades with a flat grind on just one side of the blade.
NOTE: A reasonably sharp blade may only require light honing in the FINE ceramic slot. The COARSE carbide blades in the head of the sharpener are intended for very dull or damaged edges that require a new sharp edge to be put on the blade or for initial edge setting the first time you sharpen you knife with this sharpener.
Carbide Blades - COARSE
1. Place your knife on a flat surface with the cutting edge facing up and allow about 1" of the blade to extend past the edge of the surface. Secure the knife with downward pressure on the handle.
2. Place the sharpening slot in the head of the sharpener over the cutting edge at an approximate 45 degree angle to the blade near the handle of your knife.
3. Pull sharpener over cutting edge from heel to tip while applying moderate, downward pressure. Use a smooth, consistent stroke when pulling the sharpener over the cutting edge and continue your outward motion at the end of each stroke to avoid any contact with the blade. If your blade curves out to the tip, be sure to follow the curvature of the blade all the way out to the tip to ensure sharpening of the complete cutting edge.
4. Repeat a minimum of 5 pulls. After 5 pulls, the sharpener should begin to glide smoothly over the cutting edge. If not, additional pulls are required.
NOTE: Knives made of extremely hard steel may require additional pulls over the cutting edge when sharpening your knife blade.
5. Move to the FINE ceramic slot for final edge honing.
CAUTION: Always keep your fingers inside the hand guard and your thumb securely on the thumb rest indention on the top of the sharpener or possible injury may occur.
Replaceable Carbide Blades - When the carbide blades in the head of the sharpener stop removing metal from the knife blade, they can be replaced.
Ceramic Rods - FINE
1. Place the sharpener on a flat surface and grip the handle for stability. Hold the knife comfortably in your other hand.
2. Insert knife blade fully into the sharpening slot with cutting edge of the blade resting at the bottom of the V-shaped slot and the knife straight up and down. Tilt the tip of the blade down slightly.
3. While applying light, downward pressure, pull the knife blade through the sharpening slot from heel to tip. If your blade curves up at the end, be sure to lift the handle of the knife as you approach the curved portion of the blade to sharpen all the way out to the tip of the blade.
4. Repeat a minimum of 6 - 8 pulls always sharpening from heel to tip (never back and forth). After 6 - 8 pulls, the cutting edge of the knife blade should begin to glide smoothly over the ceramic rods. If not, additional pulls are required.
NOTE: Knives made of extremely hard steel may require additional pulls through the sharpening slot when sharpening your knife blade.
5. Check the sharpness of your blade. If additional sharpening is needed, repeat process until sharp.
SCISSORS SHARPENING INSTRUCTIONS
1. With your free hand, hold the head of the sharpener and place the base of the sharpener on a flat surface. NOTE: If you are sharpening right-handed scissors/shears, the words "Right Handed" should be facing you. Opposite for left-handed.
2. Open your scissors or game shears and insert just the tips of the blades just far enough into the slot to be able to clamp down on the square rod.
3. Close scissors/shears on the sharpening rod as if you were trying to cut the rod, then push the scissors/shears through the slot while trying to keep the blades closed.
4. Repeat this action a minimum of 5 times for common household scissors and 10 times for game shears. NOTE: Scissors or Game Shears made of extremely hard steel may require additional pushes through the slot when sharpening their blades.
Caution: Always rest your sharpener on a sturdy, flat surface during scissors sharpening.
Care & Storage: Always clean your sharpener after use. Clean with a damp cloth or mild brush. Do not rinse with water. Store in a dry place under normal conditions.
| Price | $10.68 |
30 in Stock
The Adjustable Angle Pull-Thru Knife Sharpener offers new, innovative features never used on a manual knife sharpener and functional performance unmatched by standard edge maintenance products. This sharpener offers two stages of sharpening (COARSE and FINE) for all types of straight edge knives with a grind on both sides of the blade and a fixed-angle slot for sharpening serrated edge blades. It will sharpen a wide variety of knives by simply adjusting the angle of the abrasive components to match the angle of the original factory grind. Just turn the dial to one of the 6 angles offered, then pull your knife through the appropriate slot(s). It's that easy! Stop messing with those difficult to use, cumbersome, and timely Precision Sharpening Kits and get an Adjustable Angle Pull-Thru Knife Sharpener from Smith's®.
Specifications:
| Price | $25.19 |
1 in Stock
Smith's® new 4' Diamond Sharpening Stone (item # 50363) features Smith's patented interrupted diamond surface which speeds the sharpening process by collecting and holding the metal filings removed from the knife or tool edge during sharpening. This keeps the sharpening surface clean and working effectively. The 4' Diamond Sharpening Stone also comes with a Micro-Tool Sharpening Pad™ for sharpening the tips of your knife blade and small tools, a straight-line sharpening groove for fisooks and pointed objects, and a stone cover that doubles as a base when not covering the stone. It is excellent for sharpening even the hardest steel blades and works best on small to medium hunting knives, tactical knives, and everyday pocket knives.
Specifications:
| Price | $10.39 |
0 in Stock
Introducing the next generation Pocket Pal®, the Pocket Pal® X2 Sharpener and Outdoors Tool. Like the current Pocket Pal, the new X2 is lightweight, compact, and durable, but this new version comes with several, really cool features. It features the same COARSE and FINE pull-through sharpening slots and fold out, tapered diamond rod as the current Pocket Pal but adds a fire starter, compass, LED light, and signal whistle to its compact frame. It's the perfect tool for backpackers, hikers, campers, and outdoor sports enthusiasts.
Specifications:
Abrasives: Carbides- Coarse/ Ceramic- Fine (1,000)/ Diamond Rod- Medium (400)
MORE»| Price | $15.08 |
0 in Stock
Introducing the new Mechanical Broadhead Sharpening System designed specifically for the Archery retail category. The new sharpening system is the first of its kind on the market today, and will actually sharpen fixed broadheads as well. The system contains all the tools you need to disassemble, sharpen, and re-assemble a mechanical broadhead. In addition, every step was taken during the design process to ensure safety when handling the broadhead's razor sharp blades. There is a multi-blade wrench for loosening and tightening the broadhead onto your arrow and a broadhead mount in the bottom of the system to mount your broadhead to during disassembly or assembly. There is also a jig to hold the loose blades of the mechanical broadhead during sharpening. A 4' x 1 5/8' Natural Arkansas Sharpening Stone is used for sharpening the blades of either a mechanical broadhead or a Fixed-blade broadhead. The Natural Arkansas Sharpening Stone will actually polish and hone the razor's edge at the same time. No other sharpening products could perform both of these functions simultaneously.
Other features of the Mechanical Broadhead Sharpening System include 6 different size tool bits, magnetic strip in the bottom of the tray to hold small pieces and avoid loss of parts, plastic storage container, and slide locking mechanism. The Mechanical Broadhead Sharpening System allows you to store everything you need in one place.
Specifications:
| Price | $21.65 |
23 in Stock
Smith's® handheld Axe & Machete Sharpener is the perfect tool to use for keeping your axe, hatchet, or machete in prime condition. This simple and easy to use sharpener uses preset carbide blades to quickly put a smooth, sharp edge on both sides of your blade in just minutes. It has a durable, plastic head, soft grip handle, and an oversized finger guard for safe and secure sharpening at all times.
Specifications:
Abrasives: Carbides- Coarse
MORE»| Price | $10.65 |
0 in Stock
These products are perfect for the avid outdoorsman, hunter, camper, hiker, or backpacker. They could also be useful in emergency or disaster situations.
Specifications:
| Price | $10.15 |