23 Items Found
COLD STEEL
ColdSteel - AK-47 Field Knife (Stonewashed)
Model: CS14AKA

4 in Stock

Designed by Andrew Demko, the AK-47 Field Knife is enormously sturdy. Expertly crafted from CPM3-V steel, the AK-47 Field Knife with a stonewashed finish from the tip of its beefy saber ground clip point blade through its full tang and integral steel pommel ensuring and hard wearing, super tough finish.Supplied with a versatile Secure-Ex sheath, the AK-47 Field Knife is the perfect companion for today's modern Military personnel.

Specifications:

  • WEIGHT: 11.1 oz.
  • THICKNESS: 5mm
  • BLADE LENGTH: 5 1/2'
  • HANDLE: 4 7/8" Long OD Green G-10
  • STEEL / MATERIAL: CPM-3V
  • OVERALL: 10 3/8"
  • ADDITIONAL FEATURE: Secure-Ex™ Sheath
MORE»

Price $148.96

Compare

COLD STEEL
ColdSteel - 16JSM - Trail Master San Mai III
Model: CS16JSM

11 in Stock

Why buy a Trail Master®?
That's simple. Because it is, without a doubt, the most knife for the money ever commercially built! In terms of sharpness, edge holding and strength, it will out perform "by a wide margin" any factory made knife known of and 99% of all hand forged knives as well! We know we're "going out on a limb" with that statement, but since 1987 we have challenged the industry to make a better knife and yet, to this day, we've had no takers. So before you spend your hard earned bucks on one of our competitor's knives, take a moment to review all the advantages offered by the ColdSteel® Trail Master.

Style and Construction:
The broad clip point of the blade is extremely resistant to bending or breaking. This is largely due to the fact that the tip is actually thicker near the point than what is seen on our competitor's knives. This, however, does not mean that the point is dull or blunt. On the contrary, the point is almost needle sharp and offers tremendous penetration. Plus, the blade-back is equipped with a slightly concave false edge that measures approximately three and a half inches long. Every Trail Master's® edge has been honed by hand, then given a high speed buff until it is truly razor sharp and capable of easily shaving the hair off one's arm. This knife is so sharp it will cut at the slightest touch. The Trail Master® balances approximately 3/4" in front of the guard for a slightly blade-heavy feel that is ideal for delivering heavy chopping and slashing strokes. The Trail Master's® Kray-Ex™ handle is 5" long and deeply checkered for a non-slip, shock absorbing grip. What's more, its contoured cross section helps prevent the knife from shifting or turning in the hand when striking full power blows. The double guard is very study and rigidly fixed into place. It is long enough to keep fingers off the blade, yet short enough to avoid being tangled in clothing or equipment when the Trail Master® is drawn.

VG-1 San Mai III® blade:
If you want a Bowie knife that requires minimum maintenance and is practically immune to water, salt, air, or the humidity of a jungle environment, the VG-1 San Mai III® Trail Master® is for you! This Bowie will outperform any other Stainless Steel Bowie in the world in terms of strength and toughness. And, as an added bonus, this Trail Master® is equipped with a beautiful rolled edge, capable of easily severing 4" or more of free hanging manila rope!

MORE»

Price $297.97

Compare

COLD STEEL
ColdSteel - Bird and Game
Model: CS20A

6 in Stock

The ColdSteel Bird & Game is a must-have lightweight knife that's the perfect option for when weight is truly a factor. It's simple, full tang construction belies a multitude of design nuances that will soon become apparent to any hunter, survivalist or outdoorsman. Simply put, once this knife is in your hand - you'll love it! Inspired by our much-loved Bird & Trout Knife, and taking design-cues from our Spike series, the Bird & Game is designed for small game use, but is more than capable of processing large game in a pinch. The integral finger ring (coupled with the textured polymer handle scales) allows the wielder to keep a secure grip on the blade, and even let it hang from a finger while working on particularly intricate or delicate tasks. The Bird & Game's razor sharp Japanese auseighta blade has been expertly heat treated for durability, while still being a breeze to re-sharpen in the field. Weighing in at a meager 1.4 oz., the Bird & Game is an inexpensive, super lightweight hunting tool that can be stowed in a bag or pack, or even hung from a chain around your neck.

&return&&newline&

Specifications:

&return&&newline&

    &return&&newline&
  • WEIGHT 1.4 oz.
  • &return&&newline&
  • THICKNESS 2.5mm
  • &return&&newline&
  • BLADE LENGTH 3 1/2'
  • &return&&newline&
  • HANDLE 3 3/4 inch Long Polymer Grip
  • &return&&newline&
  • STEEL/MATERIAL Japanese AUS 8A Stainless
  • &return&&newline&
  • OVERALL 7 1/4 inch
  • &return&&newline&
  • ADDITIONAL FEATURE Secure-Ex® Neck Sheath & Bead Chain Lanyard
  • &return&&newline&
MORE»

Price $20.80

Compare

COLD STEEL
ColdSteel - 20BTJ - Bird And Trout Stainless
Model: CS20BTJ

4 in Stock

Specifications:

  • Blade Length: 2 1/4"
  • Overall Length: 6 5/16"
  • Steel: Japanese Aus 8A Stainless w/ Bead Blast Finish
  • Weight: 0.8 oz
  • Blade Thickness: 2.6 mm
  • Handle: 4 1/16" Long
  • Sheath: ConcealEx™

The Bird & Trout Knife is a modern version of a 100 year old classic, treasured by hunters and fishermen for generations. The secret to its enduring popularity is its ultra slim profile, and unique all steel construction. The skeletonized handle offers great versatility and freedom of movement. It's perfect for working in tight places or making precise cuts. The ring allows the knife to hang from the little finger when not in use and yet remain instantly available. The Bird & Trout is made out of AUS 8A Stainless Steel. For safety and handiness, each knife comes with a light weight Concealex neck sheath and steel bead chain lanyard.

MORE»

Price $17.81

Compare

COLD STEEL
ColdSteel - 20NPF - Finn Wolf
Model: CS20NPF

21 in Stock

Specifications:

  • Weight: 3.4 oz.
  • Blade Thickness: 3 mm
  • Blade Length: 3 1/2"
  • Handle: 4 3/8" OD Green grivix™
  • Overall: 7 7/8"
  • Steel: Japanese AUS 8A Stainless
  • Pocket Clip: Ambidextrous Pocket / Belt Clip

ColdSteel President Lynn C Thompson has always admired the sleek lines and dependable, highly functional blade shape of the classic Pukko. Ever since our inception in 1980, this classic Finnish hunting, and utility knife has never been far from his thoughts.

Over the years, we have released numerous versions of the Pukko, and now, in a design collaboration with custom knife-maker Andrew Demko, Lynn is proud to introduce a new folding Pukko - the Finn Wolf!

Taking the classic Pukko as inspiration, Andrew Demko brought his engineering genius to a new, hard-working folding knife. Thin, super lightweight, easy to carry and even easier to use, this modern every day carryknife is perhaps the perfect "everyman" knife.

Equipped with our tryad lock, adding new levels of safety and security, the Finn Wolf is utterly impervious to shock ' making it reliable in the toughest, most uncompromising conditions.

Its saten polished Japanese auseighta blade is ready to put in long ours and hard work, and, with its keen zero ground edge it's a breeze to re sharpen.

With this much performance packed into this comfortable, strong, practical and inexpensive a package, there's simply no excuse not to add one to your collection today!

MORE»

Price $38.68

Compare

COLD STEEL
ColdSteel - Finn Hawk
Model: CS20NPK

0 in Stock

A design collaboration between Andrew Demko and Lynn C. Thompson, the ColdSteel Finn Hawk is the latest in our series of inexpensive hard wearing bushcraft and outdoor tools. Its traditional Nordic styled “Scandi Ground' German 4116 steel blade is sub-zero cryo-quenched for superior edge holding potential, with a steep 7.5mm blade bevel and a functional curving belly for skinning and slicing strokes. Furthermore, its 4' blade is more than big enough for most game processing tasks, not to mention for camp chores and food prep too. The Finn Hawk's handle is two time injection molded. The first layer of high-impact polypropylene is strong, durable and highly weather resistant, while the outer layer (made of TPR rubber) has a whorled spiral pattern providing a food safe, comfortable and secure grip in even the worst conditions. The Finn Hawk is supplied complete with a slim line secure-ex polymer sheath with integrated belt loop.

&return&&newline&

Specifications:

&return&&newline&

    &return&&newline&
  • WEIGHT 5.1 oz.
  • &return&&newline&
  • BLADE LENGTH 4'
  • &return&&newline&
  • HANDLE Two time injection mold. Polypropylene encased in Thermo Plastic Rubber
  • &return&&newline&
  • STEEL/MATERIAL German 4116 Stainless Cryo Quenched
  • &return&&newline&
  • OVERALL 8 1/2 inch
  • &return&&newline&
  • ADDITIONAL FEATURE Secure-Ex® Sheath
  • &return&&newline&
MORE»

Price $23.79

Compare

COLD STEEL
ColdSteel - 20PBL - Peace Maker II
Model: CS20PBL

6 in Stock

Specifications

  • Blade Length: 5 1/2"
  • Overall Length: 10 1/4"
  • Steel: German 4116 Stainless
  • Weight: 5.4 oz
  • Blade Thickness: 3 mm
  • Handle: 4 3/4" Long High Impact Polypropylene
  • Sheath: Secure-Ex® Sheath
MORE»

Price $29.75

Compare

COLD STEEL
ColdSteel - 20PBS - Peace Maker III
Model: CS20PBS

20 in Stock

Specifications

  • Blade Length: 4"
  • Overall Length: 8 1/2"
  • Steel: German 4116 Stainless
  • Weight: 3.4 oz
  • Blade Thickness: 2.5 mm
  • Handle: 4 3/4" Long High Impact Polypropylene
  • Sheath: Secure-Ex® Sheath
MORE»

Price $26.76

Compare

COLD STEEL
ColdSteel - 20PC - Finn Bear
Model: CS20PC

0 in Stock

Specifications:

  • Blade Length: 4"
  • Overall Length: 8 1/2"
  • Steel: German 4116 Stainless
  • Weight: 2.8 oz
  • Blade Thickness: 2.5 mm
  • Handle: 4 1/2" Long High Impact Polypropylene
  • Sheath: Cor-Ex™ Sheath

Reflecting the best of its Finnish heritage, the Finn Bear is an extremely affordable version of our popular Sisu™. It's ideal for hunting, fishing or camping trips, and makes an efficient utility knife as well!

The German 4116 Stainless blade is hollow ground and given an Rc hardness of 56-57, so it will hold a good edge and is easy to re-sharpen. Its blade shape is centuries old and practical because of its good sturdy point for piercing and long belly for skinning, cutting and carving. It's big and strong enough to skin a Moose, yet thin and delicate enough to slice a tomato or cut up an apple.

The Finn Bear has a straight handle with a slightly ribbed texture for traction. Its modified diamond cross section will fit your hand like a glove and accommodate a wide variety of gripping methods. It's made of tough Polypropylene, so it's impervious to the elements and won't swell, shrink, rot or crack.

For safety and convenience, the Finn Bear comes with a deep pouch style Cor-Ex sheath and generously sized belt loop so it can be worn on the waist, slung around the neck or tossed into a duffle bag or tackle box.

MORE»

Price $16.33

Compare

COLD STEEL
ColdSteel - Roach Belly
Model: CS20RBC

0 in Stock

Historically, the Roach-Bellied knife was a short blade with a pronounced upswept curve and a sharp point that saw popularity in 17th century Britain and the American Colonies. It was most likely named after the common Roach Fish, which had a similarly round curving belly. ColdSteel's model is a nod to the Black Powder Community, which has continued to appreciate the Roach Belly's economy, versatility and effectiveness. The hollow ground blade is made of sub-zero quenched German 4116 Stainless steel, expertly heat treated to RC 56-57, and given a sharp edge that's easy to maintain. Instead of the traditional wood handle, ours is made of a tough injection molded polymer, making the Roach Belly considerably more weatherproof than historical examples - not swelling, shrinking, rotting or cracking like its wooden counterparts. The Roach Belly comes complete with a durable polymer sheath, making it a breeze to carry all day or on extended hunting or camping adventures.

Specifications:

  • WEIGHT 2.6 oz.
  • THICKNESS 2.5mm
  • BLADE LENGTH 4 1/2'
  • HANDLE 4" Long High Impact Polypropylene
  • STEEL/MATERIAL German 4116 Stainless Cryo Quenched
  • OVERALL 8 1/2"
  • ADDITIONAL FEATURE Secure-Ex® Sheath
MORE»

Price $14.84

Compare

COLD STEEL
ColdSteel - 20SPH - Pendleton Lite Hunter
Model: CS20SPH

0 in Stock

Specifications:

&return&&newline&

    &return&&newline&
  • Blade Length: 3 5/8"
  • &return&&newline&
  • Overall Length: 8 1/2"
  • &return&&newline&
  • Steel: German 4116 Stainless
  • &return&&newline&
  • Weight:2.7 oz
  • &return&&newline&
  • Blade Thickness: 2.5 mm
  • &return&&newline&
  • Handle: 4 7/8" Long High Impact Polypropylene
  • &return&&newline&
  • Sheath: Cod-Ex™ Sheath
  • &return&&newline&

&return&&newline&

Over the years our Pendleton Hunters have become enormously popular, and while we think they are reasonably priced, many have asked us for a more affordable Pendleton that will accommodate just about anyone's budget.

So we got together with Lloyd and designed a new knife we call the Pendleton Lite Hunter. In appearance it strongly resembles the rest of the family with a drop point blade, modest guard, hollowed bolster area and a flared butt to aid retention. The only major changes were the adoption of more affordable German 4116 Stainless Steel and the use of polypropylene instead of Kraton for the handle.

In our testing it got straight A's in the field as it is equally adept at field dressing and skinning, held a decent edge, was easy to sharpen, and proved to be tough as nails.

If you're looking for a very affordable hunting/utility knife that comes with a good, pouch-style sheath and delivers more than your money's worth in performance and value look no further than the Pendleton Lite.

MORE»

Price $19.31

Compare

COLD STEEL
ColdSteel - 3V Master Hunter Stonewashed
Model: CS36CB

7 in Stock

We are proud to announce a new version of our beloved Master Hunter. Retaining it's classic lines and functional design, but with the integration of some of the finest materials in the industry today. Featuring an extra broad American CPM3-V High Carbon Steel blade and honed by hand to a razor sharpness that has to be felt to be believed.

We are proud to announce a new version of our beloved Master Hunter. Retaining it's classic lines and functional design, but with the integration of some of the finest materials in the industry today. Featuring an extra broad American CPM3-V High Carbon Steel blade and honed by hand to a razor sharpness that has to be felt to be believed. The Master Hunters curved cutting edge slices effortlessly through even the toughest hide, while its stout but sharp drop point makes field dressing and skinning a breeze. The spine of the blade is a full 3/16" thick to allow for the necessary strength and stiffness to field dress and skin even the biggest animals. The grip is specially designed to promote long use without fatigue. Made of the shock absorbent Kray-Ex™, and featuring our deeply checkered surface, it won't slip no matter how cold, wet or bloody your hands get, and it will give you a positive and secure purchase on your blade even when wearing thick gloves. Plus, Kray-Ex™ has specially enduring advantages for a hunter, in that it will never rot, shrink, crack, splinter, or mildew, and is completely impervious to even the harshest weather. For safety, the Master Hunter® comes in a adaptable and versatile Secure-Ex™ sheath that will accommodate just about any belt, pack or rig. the perfect companion for a dedicated hunter who deserves the very best - The Master Hunter by ColdSteel.

Specifications:

  • PART # 36CB
  • WEIGHT 6.4 oz.
  • THICKNESS No
  • BLADE LENGTH 4 1/2'
  • HANDLE 4 3/4" Long Kray-Ex™
  • STEEL / MATERIAL U.S. CPM 3-V High Carbon Stonewash
  • OVERALL 9 1/4"
  • ADDITIONAL FEATURE Tek-Lok Campatible Secure-Ex® Sheath
MORE»

Price $179.99

Compare

COLD STEEL
ColdSteel - 36JSK - Master Hunter
Model: CS36JSK

6 in Stock

Specifications:

  • Blade Length: 4 1/2"
  • Overall Length: 9 1/4"
  • Steel: VG-10 San Mai 
  • Weight: 6.4 oz
  • Blade Thickness: 3/16"
  • Handle: 4 3/4" Long Kray-Ex™
  • Sheath: ConcealEx™ Sheath

Modesty seldom comes into play when we are describing how good our knives are. But in the case of the Master Hunter®, we've been unquestionably negligent in that department. So, modesty aside, we want to go on record and say, without a doubt, the Master Hunter® is the best hunting knife you can obtain at any price. It features a broad VG-1 San Mai ® blade that's been flat ground to achieve the ideal blade cross-section and edge geometry. Carefully honed to razor sharpness, its edge cuts effortlessly while its dropped point simplifies the chore of field dressing and skinning.

The spine of the blade is a full 3/16" thick to allow for the necessary strength and stiffness to field dress and skin the biggest animals like elk, moose, brown bear, and the African Dangerous Seven. The grip is specially designed to promote long use without fatigue. Made of the shock absorbent, slightly tacky feeling Kray-Ex™, and featuring our deeply checkered surface, it positively won't slip no matter how wet or bloody your hands get. Plus, Kray-Ex™ has specially enduring advantages in that it will never rot, shrink, crack, splinter, or mildew, and is completely impervious to even the harshest weather. For safety, the Master Hunter® comes in a thick, heavy Conceal-Ex™ sheath that will accommodate just about any size belt and allow you to carry it all day without fatigue.

MASTER HUNTER PLUS
Sharing most of the design features of our Master Hunter®, this variation features a guthook. This makes it an extremely useful tool for field dressing and opening body cavities without piercing the entrails.

MORE»

Price $101.27

Compare

COLD STEEL
ColdSteel - 36LPCM - 3V Pendleton Mini Hunter
Model: CS36LPCM

4 in Stock

Specifications:

  • Weight: 2.1 oz.
  • Blade Thickness: 3 mm
  • Blade Length: 3"
  • Handle: 3 5/8" Long. Kray-Ex™
  • Overall: 6 5/8"
  • Steel: U.S. CPM 3-V High Carbon With DLC Coating
  • Sheath: Secure-Ex® Sheath

our company president, Lynn C Thompson, bought the first knife that custom maker, Lloyd Pendleton ever made in 1973. The two went on to be fast friends, and together they collaborated on some of the finest hunting knives in the industry, the Pendleton Series.

our Mini Hunter was designed with one goal in mind, to pare down a functional hunting knife to the smallest size that practicality would allow.

Capable of skinning, dressing and processing even large game, this diminutive hunting knife is an indispensable tool that will make a perfect addition to any hunting or camping pack or survival kit.

Newly improved for 2015 with an upgraded handle for a secure 4 finger grip, the Pendleton Mini Hunter also comes complete with a tough, weather resistant Secure-Ex™ sheath, locking it safely in place, while remaining light enough to carry 24 ours a day.

our Pendleton Hunter and Mini Hunter are now also available for 2015 in premium American CPM 3-V High Carbon Steel, with a hard wearing DLC (diamond like) coating for superior durability in the field.

MORE»

Price $95.99

Compare

COLD STEEL
ColdSteel - 36LPME - Pendleton Mini Hunter
Model: CS36LPME

0 in Stock

Specifications:

  • Blade Length: 3"
  • Overall Length: 6 1/4"
  • Steel: VG-1 Stainless
  • Weight: 2.4 oz
  • Blade Thickness: 1/8"
  • Handle: 3 1/4" Long Kray-Ex™
  • Sheath: Secure-Ex® Sheath

our president, Lynn Thompson bought the first knife that custom maker, Lloyd Pendleton ever made in 1973. Now the two friends have collaborated to produce two of Lloyd's most popular knives, we call them the Lloyd Pendleton Hunter and Mini Hunter.

In fabricating these knives, we have tried to duplicate Lloyd's work as accurately as possible. Both the Pendleton Hunter's hollow ground blade and the Mini Hunter's flat ground blade are honed to perfection. The handle's cross sections and contours match Lloyd's handmade knives exactly. For safety and durability, we have dispensed with leather in favor of Secure-Ex for the sheaths. This material won't rot or mildew and is far more resistant to cuts or punctures than leather.

Pendleton Custom Classic:
Whether you're hunting the Big Five in Africa, Elk in Colorado, Moose and Bears in Alaska, or Whitetail deer in the North Forty, there aren't many things that will enhance your hunting experience more than carrying and using this superb custom-quality hunting knife. our Pendleton Custom Classic is a handsome reproduction of Lloyd Pendleton's Drop Point Hunter. It has a 3 1/2" blade with a sharp yet sturdy point for piercing and a truly razor sharp edge with plenty of belly. Its hand crafted polished blade is hollow ground from 5 mm thick VG-1 San Mai III® blade construction and boasts state of the art vacuum heat treatment, a sub zero quench and multiple tempering. With its tapered full tang construction and extra stout "spine" it's virtually indestructible and, in a pinch, can double as a life saving survival knife. Lloyd's guard and integral bolster have been exactly duplicated. Precision machined from stainless steel and skillfully polished, it features a single short quillon and a unique "thumb print" on the bolster to help protect the fingers and allow any number of grip options. The handle is also a faithful copy of Lloyd's original. Featuring a red fiber liner that accents the tapered tang, and twin contoured handle scales made of highly polished black linen micarta with six stainless retaining pins. A heavy pouch style sheath is included. It's made from brown cowhide with a thick welt and sturdy stitching and is wet molded to fit each knife. It covers two thirds of the handle so your knife is held secure and won't "pop out" inadvertently.

MORE»

Price $31.37

Compare